Full 24 pins for full USB4/TB3 connectivity

Notices where this attachment appears

1. Embed this notice
   Birdulon (birdulon@shpposter.club)'s status on Thursday, 01-Feb-2024 22:03:53 JST Birdulon

   in reply to
   @WashedOutGundamPilot @Boomerman @Shadowman311 @sickburnbro Yes, it needs to be a magnetic connector that has all of the pins, unlike the charger or USB2.0 ones which only have 2 or four pins.
   
   It's a lot of pins in such a dense connector and a lot of wires in such a dense multicore cable, I recently had a "cheap" 3m USB4 cable start failing to handshake over what I can only assume was internal damage from very minor kinking (it was left loosely coiled then gradually pulled straight while moving the attached device around) and I can't think of any other consumer cable that seems this fragile. It's funny to think that it's like a 5mm thick version of those multicores which are like 15mm thick and still feel relatively fragile for stage wiring.