Public
- Public
- Network
- Groups
- Featured
- Popular
- People

Here's the die polished and inked! Each number on the white part has been filled with black paint, and each number on the clear part over the black hollow has been filled with white paint, for maximum visibility The number 6 (with pip) crosses from the white part to the black part, so I've inked it half black and half white. I'm very proud of this!

Download link

Here's the die polished and inked! Each number on the white part has been filled with black paint, and each number on the clear part over the black hollow has been filled with white paint, for maximum visibility The number 6 (with pip) crosses from the white part to the black part, so I've inked it half black and half white. I'm very proud of this!
https://6-28.mastodon.xyz/media_attachments/files/112/866/086/015/218/761/original/bcf5e7182a9edbe3.jpeg

Notices where this attachment appears

Embed this notice
Louisa (louisa@mastodon.xyz)'s status on Tuesday, 20-Aug-2024 11:21:27 JST Louisa
in reply to

VERY happy with this new mold! I only have to sand/polish one face (the 20) this way, rather than 4 faces (the 20 and the 3 that touch it) plus the resin reservoir in the cap means I won't get air bubbles
I tested it out with another geode design, like the first die I made— this time a white stone with a glittery black interior 🔳🔲🔳🔲🔳
https://youtube.com/shorts/TSwd4rWU0es

In conversation about 3 months ago from mastodon.xyz permalink