A Doepfer A-196 PLL eurorack synth module. It has an aluminium faceplate with black silkscreened lettering. It has 5 jack sockets down the left hand side marked top to bottom: CV In, (Symbols for square wave) Out, In 1, In 2 (Signal in), Low Pass. On the centre & right there is (top to bottom) Potentiometer marked "Offs." (i.e. Offset) and "VCO" Three position switch marked Range and below it Low Hi Mid The word "locked" next to a red LED indicator then "(2)" Another 3 position switch marked Phase Comp. (i.e. comparator), marked beneath 1,2, 3, and below that "type" Another jack socket, this one marked "out" Another potentiometer, marked "Frequ." (i.e. frequency) It is secured in a rack between a black Erica Pico and generator and an mrg synths LP filter. There are gaps either side
https://mastodon.sdf.org/system/media_attachments/files/111/388/267/053/493/379/original/d5b800c04ab7d756.jpg