Close-up of the board and some of the switches that have been placed. The board is plugged in and the switch LEDs are lid.

Notices where this attachment appears

1. Embed this notice
   Aral Balkan (aral@mastodon.ar.al)'s status on Tuesday, 15-Aug-2023 03:46:40 JST Aral Balkan

   in reply to

   So the direction the switches are shown in the instructions is wrong. The pins have to be at the top, not the bottom (that’s where the holes are in the PCB). Double-checked it just to be sure I hadn’t done something odd.

   Tip: you can plug the PCB into your computer and check each switch works as you plug it in :)

   (Careful you don’t bend the pins when placing the switches. Make sure they go straight into the holes.)

   #KitAdam #mechanicalKeyboard #switches #lego