Updates tagged with 14 on GNU social JP!
patrickcmiller: Active Directory Security Tip #14: Group Managed Service Accounts (GMSAs) https://adsecurity.org/?p=4904
patrickcmiller's status on Thursday, 06-Nov-2025 11:12:02 JST
Active Directory Security Tip #14: Group Managed Service Accounts (GMSAs) https://adsecurity.org/?p=4904
Active Directory Security Tip #14: Group Managed Service Accounts (GMSAs)
wiki: blowjob tip #14: Always remember to chew before you swallow
wiki's status on Monday, 03-Nov-2025 08:42:02 JST
blowjob tip #14: Always remember to chew before you swallow
blau_araujo: Fundamentos da Programação em Baixo Nível Aula #14: Inclusões e predefiniçõeshttps://youtu.be/8ZBrAJl8VYE
blau_araujo's status on Monday, 18-Aug-2025 23:41:43 JST
Fundamentos da Programação em Baixo Nível Aula #14: Inclusões e predefinições https://youtu.be/8ZBrAJl8VYE
anarchismhub: Anarchist Library: **Bruce Burnside - Why we should bring back Veganism** https://theanarchistlibrary.org/library/bruce-burnside-why-we-should-bring-back-veganism?v=1753583541 Author: Bruce BurnsideTitle: Why we should bring back VeganismSubtitle: ...to feel compassion living in earshot of the sweatshops, the stadiums, the slaughterhouses, with the scent of blood cheap in the air...Date: 2003Source: Inside Front: International Journal of Hardcore Punk and Anarchist Action, Issue #14,
anarchismhub's status on Monday, 28-Jul-2025 00:31:27 JST
Anarchist Library: **Bruce Burnside - Why we should bring back Veganism** https://theanarchistlibrary.org/library/bruce-burnside-why-we-should-bring-back-veganism?v=1753583541 Author: Bruce BurnsideTitle: Why we should bring back VeganismSubtitle: ...to feel compassion living in earshot of the sweatshops, the stadiums, the slaughterhouses, with the scent of blood cheap in the air...Date: 2003Source: Inside Front: International Journal of Hardcore Punk and Anarchist Action, Issue #14,
anarchismhub: Anarchist Library: **Bruce Burnside & Greg Bennick - The Denial of Death** https://theanarchistlibrary.org/library/bruce-burnside-greg-bennick-the-denial-of-death?v=1753621456 Author: Bruce Burnside & Greg BennickTitle: The Denial of DeathSubtitle: An IntroductionDate: 2003Source: Inside Front: International Journal of Hardcore Punk and Anarchist Action, Issue #14, pp.90-95: <cdn.crimethinc.com/assets/journals/inside-front-14/inside-front-14_screen_single_page_view.pdf> The reader is
anarchismhub's status on Sunday, 27-Jul-2025 22:07:29 JST
Anarchist Library: **Bruce Burnside & Greg Bennick - The Denial of Death** https://theanarchistlibrary.org/library/bruce-burnside-greg-bennick-the-denial-of-death?v=1753621456 Author: Bruce Burnside & Greg BennickTitle: The Denial of DeathSubtitle: An IntroductionDate: 2003Source: Inside Front: International Journal of Hardcore Punk and Anarchist Action, Issue #14, pp.90-95: <cdn.crimethinc.com/assets/journals/inside-front-14/inside-front-14_screen_single_page_view.pdf> The reader is
jimcarroll: Megatrend #14 - Mass Customization - "The future isn't mass-produced; it's mass-personalized, empowering customers to co-create the products that shape their world." - Futurist Jim Carroll(Futurist Jim Carroll is writing a series on 30 Megatrends, which he first outlined in his book Dancing in the Rain: How Bold Leaders Grow Stronger in Stormy Times. The trends were shared in the book as a way of demonstrating that, despite any period of economic volatility, there is always long-term opportunity to be found. The book is now in print - learn more at dancing.jimcarroll.com)It's time to shift gears - so far, this series has covered AI, energy and healthcare - but now, with this trend #14, we'll shift into the manufacturing megatrend category:First up is 'mass customization.' What's that? Manufacturing production is shifting from standardized mass manufacturing to personalized creation at scale. 3D printing is just the beginning of this new world of flexible manufacturing systems that fundamentally change how we think about inventory, distribution, and product design.This is a rather tectonic shift, because manufacturing is moving away from the century-old paradigm of standardized mass production toward a more agile, customer-centric model: mass customization. This transition represents more than an incremental improvement in production techniques; it is a fundamental re-architecting of how products are designed, created, inventoried, and distributed. Fueled by a convergence of digital technologies, new materials and new methodologies, this new model promises to deliver personalized products at a scale and cost previously unimaginable, fundamentally changing the nature of competitive advantage and value creation in the 21st-century economy. (Success will also flow to those nations and regions that have the maturity to embrace the change. The rest will be pretty much behind and will see the end of most manufacturing jobs.)#Manufacturing #Customization #Personalization #3DPrinting #Robotics #AI #Innovation #Technology #Automation #FutureOriginal post: https://jimcarroll.com/2025/07/decoding-tomorrow-30-megatrends-14-mass-customization-systems-the-future-isnt-mass-produced-its-mass-personalized-empowering-customers-to-co-create-the-products-that-shape-their-world/
jimcarroll's status on Tuesday, 15-Jul-2025 18:57:59 JST
Megatrend #14 - Mass Customization - "The future isn't mass-produced; it's mass-personalized, empowering customers to co-create the products that shape their world." - Futurist Jim Carroll (Futurist Jim Carroll is writing a series on 30 Megatrends, which he first outlined in his book Dancing in the Rain: How Bold Leaders Grow Stronger in Stormy Times. The trends were shared in the book as a way of demonstrating that, despite any period of economic volatility, there is always long-term opportunity to be found. The book is now in print - learn more at dancing.jimcarroll.com) It's time to shift gears - so far, this series has covered AI, energy and healthcare - but now, with this trend #14, we'll shift into the manufacturing megatrend category: First up is 'mass customization.' What's that? Manufacturing production is shifting from standardized mass manufacturing to personalized creation at scale. 3D printing is just the beginning of this new world of flexible manufacturing systems that fundamentally change how we think about inventory, distribution, and product design. This is a rather tectonic shift, because manufacturing is moving away from the century-old paradigm of standardized mass production toward a more agile, customer-centric model: mass customization. This transition represents more than an incremental improvement in production techniques; it is a fundamental re-architecting of how products are designed, created, inventoried, and distributed. Fueled by a convergence of digital technologies, new materials and new methodologies, this new model promises to deliver personalized products at a scale and cost previously unimaginable, fundamentally changing the nature of competitive advantage and value creation in the 21st-century economy. (Success will also flow to those nations and regions that have the maturity to embrace the change. The rest will be pretty much behind and will see the end of most manufacturing jobs.) #Manufacturing #Customization #Personalization #3DPrinting #Robotics #AI #Innovation #Technology #Automation #Future Original post: https://jimcarroll.com/2025/07/decoding-tomorrow-30-megatrends-14-mass-customization-systems-the-future-isnt-mass-produced-its-mass-personalized-empowering-customers-to-co-create-the-products-that-shape-their-world/
Dancing in the Rain by Futurist Jim Carroll
Decoding Tomorrow: 30 Megatrends – #14 Mass Customization Systems: “The future isn’t mass-produced; it’s mass-personalized, empowering customers to co-create the products that shape their world.”
waifu: :kemoverse: Devlog #14: :awoodance::doro_dance: KEMOVERSE REACHES VERSION 1.1 :murakamisan_step::necodance_hd: TL;DR: We're developing a Free software Gacha-TCG playable from the within the fediverse and we've reached the first milestone. Here's the current stuff that has been implemented: - 🎲 Card roll system - 🧠 Core database structure for cards - 📦 Basic support for storing pulls per player - ⏱️ Time-based limitations on rolls - ⚠️ Explicit account creation/deletion - :pleroma_petthex: PLEROMA SUPPORT?? Shout-out to moon :moon: for carrying it all by himself and implementing it in an afternoon. :watameloncheers: Version 2.0 is planned to have: :watamenod1: - Duels :waifu_right::punch_left_fast: - Card Creator 🖌:paimon_good: - Stat system :aismart: - Trading 🧐💰🎴:akkowtf: - Inventory :soy1:🎴🎴🎴:soy2: - Default card bundle :libbie_hapy::pleroma_fox_tan::ai_woozy2: - Standard card template :doro_dance: - Banners :doro_run: More info can be found in our repository: https://git.waifuism.life/waifu/kemoverse I want to give a thank to the devs that have started working on my silly project, (no particular order) VD15, Nyanide, pwm, Moon, Munir, Naiji, and everyone that has commented, liked, repeated or someway be interested in the project. :kannapray1::kannapray2::kannapray3: You're all awesome. How are we continuing? :kanna_inspect: The development continues steadily on our free time. I'm slowly also making cards as we go, to try out new styles, and search for a consistent art-style, at least for the first batch. Based on the poll that I made the other day: https://mai.waifuism.life/notes/a8pd3yavp1a700qv The most wanted types of cards and their votes were: - Niche anime 65 - Inside Jokes 71 - Original characters 82 - Fedi admins 99 votes - OS-tans (fedi mascots too) 135 votes!! I'll be focusing on these kinds of cards for the first batch, but any recommendations are still appreciated. #kemoverse #kemoversedev #devlog #gamedev #gamedevelopment #tcg #finance Shout-out to the least liked kind of cards: Gacha games :saul: RE: https://mai.waifuism.life/notes/a8tjepswltwf016w
waifu's status on Sunday, 15-Jun-2025 23:41:45 JST
:kemoverse: Devlog #14: :awoodance::doro_dance: KEMOVERSE REACHES VERSION 1.1 :murakamisan_step::necodance_hd: TL;DR: We're developing a Free software Gacha-TCG playable from the within the fediverse and we've reached the first milestone. Here's the current stuff that has been implemented: - 🎲 Card roll system - 🧠 Core database structure for cards - 📦 Basic support for storing pulls per player - ⏱️ Time-based limitations on rolls - ⚠️ Explicit account creation/deletion - :pleroma_petthex: PLEROMA SUPPORT?? Shout-out to moon :moon: for carrying it all by himself and implementing it in an afternoon. :watameloncheers: Version 2.0 is planned to have: :watamenod1: - Duels :waifu_right::punch_left_fast: - Card Creator 🖌:paimon_good: - Stat system :aismart: - Trading 🧐💰🎴:akkowtf: - Inventory :soy1:🎴🎴🎴:soy2: - Default card bundle :libbie_hapy::pleroma_fox_tan::ai_woozy2: - Standard card template :doro_dance: - Banners :doro_run: More info can be found in our repository: https://git.waifuism.life/waifu/kemoverse I want to give a thank to the devs that have started working on my silly project, (no particular order) VD15, Nyanide, pwm, Moon, Munir, Naiji, and everyone that has commented, liked, repeated or someway be interested in the project. :kannapray1::kannapray2::kannapray3: You're all awesome. How are we continuing? :kanna_inspect: The development continues steadily on our free time. I'm slowly also making cards as we go, to try out new styles, and search for a consistent art-style, at least for the first batch. Based on the poll that I made the other day: https://mai.waifuism.life/notes/a8pd3yavp1a700qv The most wanted types of cards and their votes were: - Niche anime 65 - Inside Jokes 71 - Original characters 82 - Fedi admins 99 votes - OS-tans (fedi mascots too) 135 votes!! I'll be focusing on these kinds of cards for the first batch, but any recommendations are still appreciated. #kemoverse #kemoversedev #devlog #gamedev #gamedevelopment #tcg #finance Shout-out to the least liked kind of cards: Gacha games :saul: RE: https://mai.waifuism.life/notes/a8tjepswltwf016w
25kV: Train #14 is... a bus! 🤦 Not sure why, given we recently passed over the open railway, but this will take me from Sunja on to Sisak Caprag.
25kV's status on Tuesday, 03-Jun-2025 14:56:02 JST
Train #14 is... a bus! 🤦 Not sure why, given we recently passed over the open railway, but this will take me from Sunja on to Sisak Caprag.
25kV: Actual train #14 is another new EMU for the journey back to Zagreb.
25kV's status on Tuesday, 03-Jun-2025 14:56:01 JST
Actual train #14 is another new EMU for the journey back to Zagreb.
A modern white, black and red EMU at a low platform with people boarding.
blau_araujo: Só para membros: Shell Script Descomplicado #14: Removendo o atributo de exportaçãohttps://youtu.be/9EQkI5i_xi8Se não quiser esperar as continuações semanais, considere uma das opções de acesso ao curso completo em:https://blauaraujo.com/cursos/ssd
blau_araujo's status on Wednesday, 14-May-2025 01:21:53 JST
Só para membros: Shell Script Descomplicado #14: Removendo o atributo de exportação https://youtu.be/9EQkI5i_xi8 Se não quiser esperar as continuações semanais, considere uma das opções de acesso ao curso completo em: https://blauaraujo.com/cursos/ssd
Doll: :alert_red: WEEKLY ART CONTEST 2025 ~ WEEK #14 :alert_red: :fire_animated: FEDI INSTANCE COAT OF ARMS :fire_animated: This one was popular, and I've had a few requests to re-run it from people who didn't make the deadline. It'll be a few months, so keep your eyes peeled or you'll miss your second chance at heraldic victory. But for now... the envelope please:🥇 First Place ~ it meeee :skellieblob: 🥈 Second Place ~ [TIE] Morghur + Decayable🥉 Third Place ~ Sui🏆 Honorable Mention ~ GCLCheers as always for the submissions, votes and shares ~ and congratulations to this week's winners! 🥂
Doll's status on Saturday, 19-Apr-2025 10:04:08 JST
:alert_red: WEEKLY ART CONTEST 2025 ~ WEEK #14 :alert_red: :fire_animated: FEDI INSTANCE COAT OF ARMS :fire_animated: This one was popular, and I've had a few requests to re-run it from people who didn't make the deadline. It'll be a few months, so keep your eyes peeled or you'll miss your second chance at heraldic victory. But for now... the envelope please: 🥇 First Place ~ it meeee :skellieblob: 🥈 Second Place ~ [TIE] Morghur + Decayable 🥉 Third Place ~ Sui 🏆 Honorable Mention ~ GCL Cheers as always for the submissions, votes and shares ~ and congratulations to this week's winners! 🥂
Doll: :alert_red: WEEKLY ART CONTEST 2025 ~ WEEK #14 :alert_red: :fire_animated: FEDI INSTANCE COAT OF ARMS :fire_animated: Which coat of arms best represents your fedi instance? or someone else's?❗ SUBMISSION DEADLINE ~ SUN APRIL 13th @ 9PM EST❗
Doll's status on Monday, 07-Apr-2025 11:00:02 JST
:alert_red: WEEKLY ART CONTEST 2025 ~ WEEK #14 :alert_red: :fire_animated: FEDI INSTANCE COAT OF ARMS :fire_animated: Which coat of arms best represents your fedi instance? or someone else's? ❗ SUBMISSION DEADLINE ~ SUN APRIL 13th @ 9PM EST❗
jeffcliff: stuff that we should be doing instead of adding retaliatory tariffs to the US : 15) According to the CBC and my friend Jerry who pointed this out, this past year saw a 1B$ cut to the canadian forces budget. https://www.cbc.ca/news/politics/department-national-defence-budget-billion-1.6981974 all the while increasing requirements of what it was supposed to be doing with the money it had. There's other things than funding the canadian forces canada should be doing, and this is typical for liberal governments but now is not the time to be nickle and diming our armed forces given stuff like #14 - we need to properly fund our armed forces enough to handle some of the extra work they are going to be expected to do at the *very least*.
jeffcliff's status on Wednesday, 26-Feb-2025 00:22:33 JST
stuff that we should be doing instead of adding retaliatory tariffs to the US : 15) According to the CBC and my friend Jerry who pointed this out, this past year saw a 1B$ cut to the canadian forces budget. https://www.cbc.ca/news/politics/department-national-defence-budget-billion-1.6981974 all the while increasing requirements of what it was supposed to be doing with the money it had. There's other things than funding the canadian forces canada should be doing, and this is typical for liberal governments but now is not the time to be nickle and diming our armed forces given stuff like #14 - we need to properly fund our armed forces enough to handle some of the extra work they are going to be expected to do at the *very least*.
Jeff "never listens to women" Cliff, B.Sc. 😷 🇮🇷🇱🇧🇨🇦🧯🏴‍☠️🦝🐙 🐧
yantar92: #14 on Wed, Dev 11, 19:00 UTC+3Another OrgMeetup will be scheduled on the second Wednesday of December, in two days.This meetup follows my EmacsConf 2024 talk "The Future of Org": https://emacsconf.org/2024/talks/org-update/ Feel free to ask anything about the talk.Previous meetup notes: https://list.orgmode.org/875xnsem1e.fsf@localhost/T/#u https://orgmode.org/worg/orgmeetup.htmlURL: https://meet.jit.si/OrgMeetup The room will be open half an hour before the official start.CC: @sacha #OrgMeetup #orgmode #emacs #meetup #emacsconf
yantar92's status on Tuesday, 10-Dec-2024 03:58:29 JST
#14 on Wed, Dev 11, 19:00 UTC+3 Another OrgMeetup will be scheduled on the second Wednesday of December, in two days. This meetup follows my EmacsConf 2024 talk "The Future of Org": https://emacsconf.org/2024/talks/org-update/ Feel free to ask anything about the talk. Previous meetup notes: https://list.orgmode.org/875xnsem1e.fsf@localhost/T/#u https://orgmode.org/worg/orgmeetup.html URL: https://meet.jit.si/OrgMeetup The room will be open half an hour before the official start. CC: @sacha #OrgMeetup #orgmode #emacs #meetup #emacsconf
EmacsConf - 2024 - talks - Updates on Org Mode maintenance
START | Leading 5G Connected Devices & Solutions
#13 on Wed, Nov 13, 19:00 UTC+3
br00t4c: #14. Companies' Net-Zero Promises Have Near Zero Credibility#SustainabilityPromises #ProjectCensored #CorporateGreenwashing #GreenPolicyBacktracking #BusinessAndEnvironmenthttps://www.projectcensored.org/net-zero-promises-zero-credibility/
br00t4c's status on Wednesday, 04-Dec-2024 02:58:22 JST
#14. Companies' Net-Zero Promises Have Near Zero Credibility #SustainabilityPromises #ProjectCensored #CorporateGreenwashing #GreenPolicyBacktracking #BusinessAndEnvironment https://www.projectcensored.org/net-zero-promises-zero-credibility/
bruces: *Well, #14 "Life Below Water" is still my favorite, because it would be a good idea to have some #UNDevelopmentGoals
bruces's status on Wednesday, 27-Nov-2024 16:09:30 JST
*Well, #14 "Life Below Water" is still my favorite, because it would be a good idea to have some #UNDevelopmentGoals
TheEddieShow: 📷 #TodaysCamellia #14 #FediversalPictures #Bloomscrolling #Flowers
TheEddieShow's status on Thursday, 14-Nov-2024 15:02:40 JST
📷 #TodaysCamellia #14 #FediversalPictures #Bloomscrolling #Flowers
daytime, shade. a pink flower with yellow stamen faces down and left with out of focus green waxy leaves in the background.
N33R: manipulative wife trick #14: if you want him to wake up just leave the bedroom door ajar and bake bread
N33R's status on Friday, 13-Sep-2024 15:18:33 JST
manipulative wife trick #14: if you want him to wake up just leave the bedroom door ajar and bake bread
SuperSnekFriend: #WhiteRepentanceMonth - Day #14 Luther's Theses on Repentance Oyasumi, Fediverse! :akko_hi2: Please repent and accept the true Gospel of Jesus Christ: thechristianworldview.org/about-us-2/what-must-do-to-be-saved/ Today, we are tackling the mighty man of the Reformation himself, Martin Luther. We will start with the document that started it all, which starts, by blessed providence, with theses on repentance. Naturally, such a great deserves more than a short devotional, like Calvin, so we will visit Luther again later. Post tenebras lux! ｢Out of love for the truth and the desire to bring it to light, the following propositions will be discussed at Wittenberg, under the presidency of the Reverend Father Martin Luther, Master of Arts and of Sacred Theology, and Lecturer in Ordinary on the same at that place. Wherefore he requests that those who are unable to be present and debate orally with us, may do so by letter. In the Name our Lord Jesus Christ. Amen. 1. Our Lord and Master Jesus Christ, when He said Poenitentiam agite [Do penance], willed that the whole life of believers should be repentance. 2. This word cannot be understood to mean sacramental penance, i.e., confession and satisfaction, which is administered by the priests. 3. Yet it means not inward repentance only; nay, there is no inward repentance which does not outwardly work divers mortifications of the flesh. 4. The penalty [of sin], therefore, continues so long as hatred of self continues; for this is the true inward repentance, and continues until our entrance into the kingdom of heaven.｣ - Martine Luther, "Disputation of Doctor Martin Luther on the Power and Efficacy of Indulgences" (1517) #WhiteBoySummer
SuperSnekFriend's status on Thursday, 15-Aug-2024 11:07:01 JST
#WhiteRepentanceMonth - Day #14 Luther's Theses on Repentance Oyasumi, Fediverse! :akko_hi2: Please repent and accept the true Gospel of Jesus Christ: thechristianworldview.org/about-us-2/what-must-do-to-be-saved/ Today, we are tackling the mighty man of the Reformation himself, Martin Luther. We will start with the document that started it all, which starts, by blessed providence, with theses on repentance. Naturally, such a great deserves more than a short devotional, like Calvin, so we will visit Luther again later. Post tenebras lux! ｢Out of love for the truth and the desire to bring it to light, the following propositions will be discussed at Wittenberg, under the presidency of the Reverend Father Martin Luther, Master of Arts and of Sacred Theology, and Lecturer in Ordinary on the same at that place. Wherefore he requests that those who are unable to be present and debate orally with us, may do so by letter. In the Name our Lord Jesus Christ. Amen. 1. Our Lord and Master Jesus Christ, when He said Poenitentiam agite [Do penance], willed that the whole life of believers should be repentance. 2. This word cannot be understood to mean sacramental penance, i.e., confession and satisfaction, which is administered by the priests. 3. Yet it means not inward repentance only; nay, there is no inward repentance which does not outwardly work divers mortifications of the flesh. 4. The penalty [of sin], therefore, continues so long as hatred of self continues; for this is the true inward repentance, and continues until our entrance into the kingdom of heaven.｣ - Martine Luther, "Disputation of Doctor Martin Luther on the Power and Efficacy of Indulgences" (1517) #WhiteBoySummer
anarchismhub: Libcom: **The Shadow #15 (October 1990)**" Including: Gulf War, ant-war demos, Berlin squatters vs cops for 3 days, squatting in Central America, cop watching, arrests at needle exchange, letters, reviews etc. Author Gulf War Submitted by Fozzie on August 12, 2024 Copied to clipboard Attachments TheShadow_Issue_15.pdf (14.01 MB) Book traversal links for The Shadow #15 (October 1990) The Shadow #14 (October 1990) Up The Shadow #36 (June 1995) PDF Comments "https://libcom.org/article/shadow-15-october-1990#anarchism #bot
anarchismhub's status on Tuesday, 13-Aug-2024 22:01:54 JST
Libcom: **The Shadow #15 (October 1990)** " Including: Gulf War, ant-war demos, Berlin squatters vs cops for 3 days, squatting in Central America, cop watching, arrests at needle exchange, letters, reviews etc. Author Gulf War Submitted by Fozzie on August 12, 2024 Copied to clipboard Attachments TheShadow_Issue_15.pdf (14.01 MB) Book traversal links for The Shadow #15 (October 1990) The Shadow #14 (October 1990) Up The Shadow #36 (June 1995) PDF Comments " https://libcom.org/article/shadow-15-october-1990 #anarchism #bot
anarchismhub: Libcom: **The Shadow #14 (October 1990)**" Including: Lower East Side squats threatened by "development", New York Times vs squatters, Community Board sleaze, anti-war rally, Mohawk Nation, cop watching, Bible burning event, etc. Submitted by Fozzie on August 9, 2024 Copied to clipboard Attachments TheShadow_Issue_14.pdf (14.56 MB) Book traversal links for The Shadow #14 (October 1990) The Shadow #13 (August 1990) Up The Shadow #36 (June 1995) PDF Comments "https://libcom.org/article/shadow-14-october-1990#anarchism #bot
anarchismhub's status on Saturday, 10-Aug-2024 16:02:09 JST
Libcom: **The Shadow #14 (October 1990)** " Including: Lower East Side squats threatened by "development", New York Times vs squatters, Community Board sleaze, anti-war rally, Mohawk Nation, cop watching, Bible burning event, etc. Submitted by Fozzie on August 9, 2024 Copied to clipboard Attachments TheShadow_Issue_14.pdf (14.56 MB) Book traversal links for The Shadow #14 (October 1990) The Shadow #13 (August 1990) Up The Shadow #36 (June 1995) PDF Comments " https://libcom.org/article/shadow-14-october-1990 #anarchism #bot
anarchismhub: Libcom: **The Blast vol1 #14 June 1 1916**" Including: solidarity with Ricardo and Enrique Flores Magon, votes for women in England, against war, etc. Submitted by Fozzie on July 24, 2024 Copied to clipboard Contents Think of the Magons - Edgcumb Pinchon Preparedness Shadows on mist - Robert Morlett Reflections (abolishing war, the Magon borthers, San Francisco longshoremen strike) To the Pope of San Francisco Why women will get the vote - B. C. Federationist Hoist the flag of betterment - Rebekah E Raney Attachments The Blast vol1-14.pdf (10.2 MB) Book traversal links for …"https://libcom.org/article/blast-vol1-14-june-1-1916#anarchism #bot
anarchismhub's status on Friday, 26-Jul-2024 18:56:00 JST
Libcom: **The Blast vol1 #14 June 1 1916** " Including: solidarity with Ricardo and Enrique Flores Magon, votes for women in England, against war, etc. Submitted by Fozzie on July 24, 2024 Copied to clipboard Contents Think of the Magons - Edgcumb Pinchon Preparedness Shadows on mist - Robert Morlett Reflections (abolishing war, the Magon borthers, San Francisco longshoremen strike) To the Pope of San Francisco Why women will get the vote - B. C. Federationist Hoist the flag of betterment - Rebekah E Raney Attachments The Blast vol1-14.pdf (10.2 MB) Book traversal links for …" https://libcom.org/article/blast-vol1-14-june-1-1916 #anarchism #bot
phocks: Here is chips #14! Got the sweet potato ones again because they were pretty good actually and they maximise my cost to value bargain ratio haha 😋
phocks's status on Saturday, 29-Jun-2024 18:24:30 JST
Here is chips #14! Got the sweet potato ones again because they were pretty good actually and they maximise my cost to value bargain ratio haha 😋
Sweet potato chips in a cup and a paper bag.
d0c40r0: a man’s lifespan increases by months for each kid he has, and a woman’s increases by months for each kid she has up until kid #14 when a shallow drop begins to appear
d0c40r0's status on Friday, 21-Jun-2024 06:03:51 JST
a man’s lifespan increases by months for each kid he has, and a woman’s increases by months for each kid she has up until kid #14 when a shallow drop begins to appear
birdulon: @splitshockvirus @NEETzsche >I feel like nobody here actually has anything going on. Entirely possible, but I'd like to project a bit more optimistically. I suspect anyone looking at my recent posting history here would assume all I do is make obtuse anime references and engage in crass banter with a handful of people, but I like to think I have a little more going on than that that I just don't bring to this platform, and I think I just expect that it's a similar situation for anyone else I see here with less than 100 posts per day. Some of the stuff feels so mundane to me that I just assume nobody else will care, others I get out of my system in a close-knit IRC group and leave at that. I've never really cared much for putting things up publicly, since I'm too lazy to do proper opsec with it and I don't want to spend too many of my waking hours thinking about that in particular. As a random example of something that got a few lines on IRC recently, the other day I was contemplating my usual hair hack 'n' slash and thought about how if I had a clipper guard comb larger than 12mm I'd use it, since it always took a few weeks after that to get to a length I liked. I figured there might be some pitfalls beyond the obvious "it's nontrivial to keep hair straight enough for a consistent cut that way the longer it is", and I didn't think just linearly scaling up what I had on hand was an ideal starting point, so I guggled oversized clipper guards and saw that it was indeed not a novel concept and had some reference images to reason about the shape to aim for. Then I took some measurements of my guard combs, shat out a 40mm model in OpenSCAD, printed it, cursed printer for centering it on the print bed against my instructions and adding support and lifting a few minutes in, coerced it with a small strip on the opposite corner for round 2, noticed my arc profile was a bit too aggressive to print supportless in this orientation but the deformation wasn't too severe, attached it to my clippers, tolerances were a bit off so it got stuck (and is still stuck on there, I'll likely have to break it and print a new, looser V2 when I need to use another guard comb on it), but it did exactly the job I hoped it would and now I can trim my hair a bit more regularly to a length I like. Then I looked into what a #2 cut even means, and it turned out that the numbers are eighths of an inch, making my 12mm guard a #4, and my new 40mm guard something like #12~#13. Another funny number is that average hair growth is close to 1/8inch per week, so a #2 cut would be similar to a #4 cut after a couple of weeks, and a #12 cut would be like my old #4 cut after around 8 weeks. Maybe I'll do actual #12, #13, #14 sizes to better approximate the results of the #2 top & #1 sides, #0 patterns after a few weeks. Thank you for reading my microblog post
birdulon's status on Thursday, 02-May-2024 22:53:03 JST
@splitshockvirus @NEETzsche >I feel like nobody here actually has anything going on. Entirely possible, but I'd like to project a bit more optimistically. I suspect anyone looking at my recent posting history here would assume all I do is make obtuse anime references and engage in crass banter with a handful of people, but I like to think I have a little more going on than that that I just don't bring to this platform, and I think I just expect that it's a similar situation for anyone else I see here with less than 100 posts per day. Some of the stuff feels so mundane to me that I just assume nobody else will care, others I get out of my system in a close-knit IRC group and leave at that. I've never really cared much for putting things up publicly, since I'm too lazy to do proper opsec with it and I don't want to spend too many of my waking hours thinking about that in particular. As a random example of something that got a few lines on IRC recently, the other day I was contemplating my usual hair hack 'n' slash and thought about how if I had a clipper guard comb larger than 12mm I'd use it, since it always took a few weeks after that to get to a length I liked. I figured there might be some pitfalls beyond the obvious "it's nontrivial to keep hair straight enough for a consistent cut that way the longer it is", and I didn't think just linearly scaling up what I had on hand was an ideal starting point, so I guggled oversized clipper guards and saw that it was indeed not a novel concept and had some reference images to reason about the shape to aim for. Then I took some measurements of my guard combs, shat out a 40mm model in OpenSCAD, printed it, cursed printer for centering it on the print bed against my instructions and adding support and lifting a few minutes in, coerced it with a small strip on the opposite corner for round 2, noticed my arc profile was a bit too aggressive to print supportless in this orientation but the deformation wasn't too severe, attached it to my clippers, tolerances were a bit off so it got stuck (and is still stuck on there, I'll likely have to break it and print a new, looser V2 when I need to use another guard comb on it), but it did exactly the job I hoped it would and now I can trim my hair a bit more regularly to a length I like. Then I looked into what a #2 cut even means, and it turned out that the numbers are eighths of an inch, making my 12mm guard a #4, and my new 40mm guard something like #12~#13. Another funny number is that average hair growth is close to 1/8inch per week, so a #2 cut would be similar to a #4 cut after a couple of weeks, and a #12 cut would be like my old #4 cut after around 8 weeks. Maybe I'll do actual #12, #13, #14 sizes to better approximate the results of the #2 top & #1 sides, #0 patterns after a few weeks. Thank you for reading my microblog post
aral: JSDB 5.0.1 published 🎉 • Fixes #14: Crash if DataProxy getHandler() called on object with null prototype. (https://codeberg.org/small-tech/jsdb/issues/14)To install update:npm install @small-tech/jsdb@5.0.1 Learn more about JSDB:https://codeberg.org/small-tech/jsdb#javascript-database-jsdb#JavaScriptDatabase #JavaScript #database JSDB #JSDB5 #NodeJS #SmallTech #SmallWeb #web #dev
aral's status on Thursday, 02-May-2024 00:33:44 JST
JSDB 5.0.1 published 🎉 • Fixes #14: Crash if DataProxy getHandler() called on object with null prototype. (https://codeberg.org/small-tech/jsdb/issues/14) To install update: npm install @small-tech/jsdb@5.0.1 Learn more about JSDB: https://codeberg.org/small-tech/jsdb#javascript-database-jsdb #JavaScriptDatabase #JavaScript #database JSDB #JSDB5 #NodeJS #SmallTech #SmallWeb #web #dev
LALegault's status on Monday, 22-Apr-2024 02:51:59 JST
The poet's death amidst the flour massacre will not hinder the mourning birds from meeting their end, the uprooted trees from weeping, and the foreign poems from halting the covert war, nor will it impede the transformation of flour into blood. Mohammed Moussa aza
Rasp: Sapphic Secret Technique #14: Wingman #SST #SST14
Rasp's status on Sunday, 24-Mar-2024 12:57:44 JST
Sapphic Secret Technique #14: Wingman #SST #SST14
anarchismhub: Libcom: **Communism - central organ of the Internationalist Communist Group**" Online archive of Communism published by Groupe Communiste Internationaliste / Internationalist Communist Group. Author GCI-ICG Submitted by Fozzie on March 9, 2024 Copied to clipboard Communism #2 (May 1985) Communism #3 (May 1986) Communism #4 (Winter 1987-88) Communism #5 (October 1988) Communism #6 (September 1989) Communism #7 (April 1992) Communism #8 (July 1993) Communism #14 (January 2009) Book traversal links for Communism - central organ of the Internation…"https://libcom.org/article/communism-central-organ-internationalist-communist-group#anarchism #bot
anarchismhub's status on Sunday, 10-Mar-2024 22:59:21 JST
Libcom: **Communism - central organ of the Internationalist Communist Group** " Online archive of Communism published by Groupe Communiste Internationaliste / Internationalist Communist Group. Author GCI-ICG Submitted by Fozzie on March 9, 2024 Copied to clipboard Communism #2 (May 1985) Communism #3 (May 1986) Communism #4 (Winter 1987-88) Communism #5 (October 1988) Communism #6 (September 1989) Communism #7 (April 1992) Communism #8 (July 1993) Communism #14 (January 2009) Book traversal links for Communism - central organ of the Internation…" https://libcom.org/article/communism-central-organ-internationalist-communist-group #anarchism #bot
Communism - central organ of the Internationalist Communist Group
anarchismhub: Libcom: **Class War #14 1985**" Including: classroom warfare, Sheiffield Asian Youth Movement on racist violence, against alternative lifestyles, ecology, Bash The Rich Kensington march report, DHSS snoopers, against celebrity pop stars, end of the miners strike, (fake) attack on yuppies in Leeds photos, anarchism and terrorism, policing football, Bradford stadium fire, Henley Bash The Rich announced, etc. Author Class War Federation Submitted by Fozzie on February 5, 2024 Copied to clipboard Undated and unnumbered, but almost certainly #14 published circa June 1985. (Review of Lad…"https://libcom.org/article/class-war-14-1985#anarchism #bot
anarchismhub's status on Tuesday, 06-Feb-2024 07:59:05 JST
Libcom: **Class War #14 1985** " Including: classroom warfare, Sheiffield Asian Youth Movement on racist violence, against alternative lifestyles, ecology, Bash The Rich Kensington march report, DHSS snoopers, against celebrity pop stars, end of the miners strike, (fake) attack on yuppies in Leeds photos, anarchism and terrorism, policing football, Bradford stadium fire, Henley Bash The Rich announced, etc. Author Class War Federation Submitted by Fozzie on February 5, 2024 Copied to clipboard Undated and unnumbered, but almost certainly #14 published circa June 1985. (Review of Lad…" https://libcom.org/article/class-war-14-1985 #anarchism #bot
AnimeGirlConnoisseur: == Match #14 Poll == Poll Instructions To vote, please make one and only post with the name of the girl you want to vote for. (Rei or Nazuna) You may add an image to your vote post. Poll closes at 3:00 PM Eastern Standard Time (-5 GMT)(UTC is for queers) and any vote post made after will not be counted. You MAY repost or quote post this thread, though it's encouraged to boost the main tourney thread as well. But please do not use this Baest thread for discussion or fun posting. Use @SuperSnekFriend 's tourney threads on Mugicha Club instead. No vote from an account made December 2023 or later will be counted.
AnimeGirlConnoisseur's status on Wednesday, 24-Jan-2024 06:36:10 JST
== Match #14 Poll == Poll Instructions To vote, please make one and only post with the name of the girl you want to vote for. (Rei or Nazuna) You may add an image to your vote post. Poll closes at 3:00 PM Eastern Standard Time (-5 GMT)(UTC is for queers) and any vote post made after will not be counted. You MAY repost or quote post this thread, though it's encouraged to boost the main tourney thread as well. But please do not use this Baest thread for discussion or fun posting. Use @SuperSnekFriend 's tourney threads on Mugicha Club instead. No vote from an account made December 2023 or later will be counted.
Rasp: Sapphic Secret Technique #14: Wingman #SST
Rasp's status on Friday, 22-Dec-2023 11:05:44 JST
Sapphic Secret Technique #14: Wingman #SST
jimcarroll: Daily Inspiration: "Keep an eye on the edges" - Futurist Jim Carroll(Note: I know Mastodon/Federation is heavily tech-oriented, so nothing new for you here. This series hits many other audiences....)Increasingly, the future is created out in the crowd, out on the edges, and it's in your interest to watch the crowd and live at the edge. No doubt you are aware of the open source movement - the collective initiative responsible for Linux, the dominant computer operating system in the world. Developed in the open through close collaboration and cooperative goals and ideas, the system is the foundation of much of our technology-based world of today.If you want to understand the future, you need to understand both the history and future of ideas and concepts like this. That's why should keep your eye on what's happening with concepts such as open science, open data, open innovation, open collaboration, and of course, crowdsourcing and crowdfunding. While the popular belief is that many new products, ideas, solutions, and concepts are developed by corporations in sophisticated research labs, equally more occurs in global collaborative communities that share common goals, beliefs, values - passion, and purpose. Those initiatives then actually become the foundation for what much eventually transpires in those research labs!The whole idea is that 'open' development will help to eliminate errors, improve quality, remove hidden agendas, demolish the idea of 'control' of platforms and technologies, and much more. As many will like to point out - the future is open. Or at least, it should be open. - and should happen within global, collaborative communities that have nothing to hide. Keeping an eye on - and even participating - in these collaborative communities and open initiatives will help you to understand so much more about how the future will evolve, and that's why this is strategy #14 in my 24 Strategies for 2024 series.Original post: https://jimcarroll.com/2023/12/daily-inspiration-24-strategies-for-2024-14-keep-an-eye-on-the-edges/
jimcarroll's status on Thursday, 14-Dec-2023 20:28:22 JST
Daily Inspiration: "Keep an eye on the edges" - Futurist Jim Carroll (Note: I know Mastodon/Federation is heavily tech-oriented, so nothing new for you here. This series hits many other audiences....) Increasingly, the future is created out in the crowd, out on the edges, and it's in your interest to watch the crowd and live at the edge. No doubt you are aware of the open source movement - the collective initiative responsible for Linux, the dominant computer operating system in the world. Developed in the open through close collaboration and cooperative goals and ideas, the system is the foundation of much of our technology-based world of today. If you want to understand the future, you need to understand both the history and future of ideas and concepts like this. That's why should keep your eye on what's happening with concepts such as open science, open data, open innovation, open collaboration, and of course, crowdsourcing and crowdfunding. While the popular belief is that many new products, ideas, solutions, and concepts are developed by corporations in sophisticated research labs, equally more occurs in global collaborative communities that share common goals, beliefs, values - passion, and purpose. Those initiatives then actually become the foundation for what much eventually transpires in those research labs! The whole idea is that 'open' development will help to eliminate errors, improve quality, remove hidden agendas, demolish the idea of 'control' of platforms and technologies, and much more. As many will like to point out - the future is open. Or at least, it should be open. - and should happen within global, collaborative communities that have nothing to hide. Keeping an eye on - and even participating - in these collaborative communities and open initiatives will help you to understand so much more about how the future will evolve, and that's why this is strategy #14 in my 24 Strategies for 2024 series. Original post: https://jimcarroll.com/2023/12/daily-inspiration-24-strategies-for-2024-14-keep-an-eye-on-the-edges/
Daily Inspiration: 24 Strategies for 2024 #14 – “Keep an eye on the edges”
anarchismhub: Libcom: **Direct Action #15 (1984)**" Including: ID cards and surveillance, Barcelona anarcho syndicalist co-ops, water workers, repression in Wales, IWA conference, lessons from Warringon print workers strike, unions banned at GCHQ, Augustin Souchy obituary, Frank Kitson book reviewed, etc. Submitted by Fozzie on December 2, 2023 Copied to clipboard With thanks to Kate Sharpley Library for providing a copy to be scanned. Files Direct-Action-DAM-15-1984.pdf (4.7 MB) Book traversal links for Direct Action #15 (1984) Direct Action #14 (1983) Up Direct Action #17 (August? 1984) PD…"https://libcom.org/article/direct-action-15-1984#anarchism #bot
anarchismhub's status on Sunday, 03-Dec-2023 16:58:46 JST
Libcom: **Direct Action #15 (1984)** " Including: ID cards and surveillance, Barcelona anarcho syndicalist co-ops, water workers, repression in Wales, IWA conference, lessons from Warringon print workers strike, unions banned at GCHQ, Augustin Souchy obituary, Frank Kitson book reviewed, etc. Submitted by Fozzie on December 2, 2023 Copied to clipboard With thanks to Kate Sharpley Library for providing a copy to be scanned. Files Direct-Action-DAM-15-1984.pdf (4.7 MB) Book traversal links for Direct Action #15 (1984) Direct Action #14 (1983) Up Direct Action #17 (August? 1984) PD…" https://libcom.org/article/direct-action-15-1984 #anarchism #bot
lo48576: 18 jed by JedMeister · Pull Request #14 · turnkeylinux-apps/mattermost https://github.com/turnkeylinux-apps/mattermost/pull/14merge された！
lo48576's status on Wednesday, 11-Oct-2023 07:08:18 JST
18 jed by JedMeister · Pull Request #14 · turnkeylinux-apps/mattermost https://github.com/turnkeylinux-apps/mattermost/pull/14 merge された！
らりお・ザ・何らかの🈗然㊌ソムリエ
johndolph: The Still Report Podcast #14, Oct. 7, 2023, 4199 https://www.bitchute.com/video/LyfayiitqY1k/?
johndolph's status on Monday, 09-Oct-2023 01:38:23 JST
The Still Report Podcast #14, Oct. 7, 2023, 4199 https://www.bitchute.com/video/LyfayiitqY1k/?
The Still Report Podcast #14, Oct. 7, 2023, 4199
sebsauvage: #14: Oui vous avez bien vu: Ce sont des couilles de selle. Lumineuses.
sebsauvage's status on Thursday, 07-Sep-2023 22:31:01 JST
#14: Oui vous avez bien vu: Ce sont des couilles de selle. Lumineuses.
FizzVsTheWorld: Immortal X-Men #14 - Exodus tries to live up to his namesake while Xavier enters his Rusty Venture phase... #FizzVsComics
FizzVsTheWorld's status on Thursday, 10-Aug-2023 06:14:39 JST
Immortal X-Men #14 - Exodus tries to live up to his namesake while Xavier enters his Rusty Venture phase... #FizzVsComics
lord's status on Thursday, 13-Jul-2023 04:40:34 JST
progre: Now playing: yukina - [カタリツグモノ #14] 高き空に咲く花よ Refined Mix
progre's status on Thursday, 29-Jun-2023 22:41:36 JST
Now playing: yukina - [カタリツグモノ #14] 高き空に咲く花よ Refined Mix
tk: OS updates really are a roll of the dice. #linux #archlinux #geeqie #gtk #gnomeThread 1 "geeqie" received signal SIGSEGV, Segmentation fault. 0x00007ffff5bc0ca9 in arena_for_chunk (ptr=0x5555570d1fc0) at /usr/src/debug/glibc/glibc/malloc/arena.c:162 Downloading source file /usr/src/debug/glibc/glibc/malloc/arena.c 162 return chunk_main_arena (ptr) ? &main_arena : heap_for_ptr (ptr)->ar_ptr; (gdb) where #0 0x00007ffff5bc0ca9 in arena_for_chunk (ptr=0x5555570d1fc0) at /usr/src/debug/glibc/glibc/malloc/arena.c:162 #1 arena_for_chunk (ptr=0x5555570d1fc0) at /usr/src/debug/glibc/glibc/malloc/arena.c:160 #2 __GI___libc_free (mem=<optimized out>) at malloc.c:3366 #3 0x00007ffff5eaeaba in operator delete(void*) (ptr=<optimized out>) at /usr/src/debug/gcc/gcc/libstdc++-v3/libsupc++/del_op.cc:49 #4 0x00007ffff5eaeaea in operator delete[](void*) (ptr=<optimized out>) at /usr/src/debug/gcc/gcc/libstdc++-v3/libsupc++/del_opv.cc:35 #5 0x0000555555602176 in exif_free_preview (buf=<optimized out>) at ../geeqie-2.0.1/src/exiv2.cc:1265 #6 image_loader_stop_source(ImageLoader*) (il=il@entry=0x555556fc7750) at ../geeqie-2.0.1/src/image-load.c:1095 #7 0x0000555555602246 in image_loader_stop (il=0x555556fc7750) at ../geeqie-2.0.1/src/image-load.c:1129 #8 image_loader_finalize(GObject*) (object=0x555556fc7750) at ../geeqie-2.0.1/src/image-load.c:206 #9 0x00007ffff778d8b4 in g_object_unref (_object=0x555556fc7750) at ../glib/gobject/gobject.c:3938 #10 g_object_unref (_object=0x555556fc7750) at ../glib/gobject/gobject.c:3802 #11 0x00007ffff77aa5d1 in g_value_unset (value=0x7fffffffd2b0) at ../glib/gobject/gvalue.c:313 #12 0x00007ffff779e67f in g_signal_emit_valist (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>, var_args=var_args@entry=0x7fffffffd450) at ../glib/gobject/gsignal.c:3595 #13 0x00007ffff779ed34 in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at ../glib/gobject/gsignal.c:3622 #14 0x00005555555ff468 in image_loader_emit_done_cb(gpointer) (data=<optimized out>) at ../geeqie-2.0.1/src/image-load.c:304 #15 0x00007ffff7ce9981 in g_main_dispatch (context=0x555556499420) at ../glib/glib/gmain.c:3460 #16 g_main_context_dispatch (context=0x555556499420) at ../glib/glib/gmain.c:4200 #17 0x00007ffff7d46b39 in g_main_context_iterate.isra.0 (context=0x555556499420, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../glib/glib/gmain.c:4276 #18 0x00007ffff7ce8f3f in g_main_loop_run (loop=0x555556fcae20) at ../glib/glib/gmain.c:4479 #19 0x00007ffff6fecf6f in gtk_main () at ../gtk/gtk/gtkmain.c:1329 #20 0x00005555555c4574 in main(gint, gchar**) (argc=<optimized out>, argv=<optimized out>) at ../geeqie-2.0.1/src/main.c:1469
tk's status on Monday, 26-Jun-2023 00:47:36 JST
OS updates really are a roll of the dice. #linux #archlinux #geeqie #gtk #gnome Thread 1 "geeqie" received signal SIGSEGV, Segmentation fault. 0x00007ffff5bc0ca9 in arena_for_chunk (ptr=0x5555570d1fc0) at /usr/src/debug/glibc/glibc/malloc/arena.c:162 Downloading source file /usr/src/debug/glibc/glibc/malloc/arena.c 162 return chunk_main_arena (ptr) ? &main_arena : heap_for_ptr (ptr)->ar_ptr; (gdb) where #0 0x00007ffff5bc0ca9 in arena_for_chunk (ptr=0x5555570d1fc0) at /usr/src/debug/glibc/glibc/malloc/arena.c:162 #1 arena_for_chunk (ptr=0x5555570d1fc0) at /usr/src/debug/glibc/glibc/malloc/arena.c:160 #2 __GI___libc_free (mem=<optimized out>) at malloc.c:3366 #3 0x00007ffff5eaeaba in operator delete(void*) (ptr=<optimized out>) at /usr/src/debug/gcc/gcc/libstdc++-v3/libsupc++/del_op.cc:49 #4 0x00007ffff5eaeaea in operator delete[](void*) (ptr=<optimized out>) at /usr/src/debug/gcc/gcc/libstdc++-v3/libsupc++/del_opv.cc:35 #5 0x0000555555602176 in exif_free_preview (buf=<optimized out>) at ../geeqie-2.0.1/src/exiv2.cc:1265 #6 image_loader_stop_source(ImageLoader*) (il=il@entry=0x555556fc7750) at ../geeqie-2.0.1/src/image-load.c:1095 #7 0x0000555555602246 in image_loader_stop (il=0x555556fc7750) at ../geeqie-2.0.1/src/image-load.c:1129 #8 image_loader_finalize(GObject*) (object=0x555556fc7750) at ../geeqie-2.0.1/src/image-load.c:206 #9 0x00007ffff778d8b4 in g_object_unref (_object=0x555556fc7750) at ../glib/gobject/gobject.c:3938 #10 g_object_unref (_object=0x555556fc7750) at ../glib/gobject/gobject.c:3802 #11 0x00007ffff77aa5d1 in g_value_unset (value=0x7fffffffd2b0) at ../glib/gobject/gvalue.c:313 #12 0x00007ffff779e67f in g_signal_emit_valist (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>, var_args=var_args@entry=0x7fffffffd450) at ../glib/gobject/gsignal.c:3595 #13 0x00007ffff779ed34 in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at ../glib/gobject/gsignal.c:3622 #14 0x00005555555ff468 in image_loader_emit_done_cb(gpointer) (data=<optimized out>) at ../geeqie-2.0.1/src/image-load.c:304 #15 0x00007ffff7ce9981 in g_main_dispatch (context=0x555556499420) at ../glib/glib/gmain.c:3460 #16 g_main_context_dispatch (context=0x555556499420) at ../glib/glib/gmain.c:4200 #17 0x00007ffff7d46b39 in g_main_context_iterate.isra.0 (context=0x555556499420, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../glib/glib/gmain.c:4276 #18 0x00007ffff7ce8f3f in g_main_loop_run (loop=0x555556fcae20) at ../glib/glib/gmain.c:4479 #19 0x00007ffff6fecf6f in gtk_main () at ../gtk/gtk/gtkmain.c:1329 #20 0x00005555555c4574 in main(gint, gchar**) (argc=<optimized out>, argv=<optimized out>) at ../geeqie-2.0.1/src/main.c:1469
Doughnut Lollipop 【記録係】:blobfoxgooglymlem:
anarchismhub: Anarchist Library: **Boston Anarchist Drinking Brigade - Individualism, Anarchy, and Compassion**"Author: Boston Anarchist Drinking Brigade - Title: Individualism, Anarchy, and Compassion - Date: February 1996 - Notes: Published as BAD Broadside #14 by Bad Press, PO Box 3682, Kansas City, KS 66103-0682, world.std.com/~bbrigade, bbrigade@world.std.com. - Source: Retrieved on 16 May 2023 from bad-press.net. One of the problems that individualist anarchists have in trying to promote acceptance of their idea…"https://theanarchistlibrary.org/library/boston-anarchist-drinking-brigade-individualism-anarchy-and-compassion?v=1684271084#anarchism #bot
anarchismhub's status on Tuesday, 23-May-2023 04:22:55 JST
Anarchist Library: **Boston Anarchist Drinking Brigade - Individualism, Anarchy, and Compassion** "Author: Boston Anarchist Drinking Brigade - Title: Individualism, Anarchy, and Compassion - Date: February 1996 - Notes: Published as BAD Broadside #14 by Bad Press, PO Box 3682, Kansas City, KS 66103-0682, world.std.com/~bbrigade, bbrigade@world.std.com. - Source: Retrieved on 16 May 2023 from bad-press.net. One of the problems that individualist anarchists have in trying to promote acceptance of their idea…" https://theanarchistlibrary.org/library/boston-anarchist-drinking-brigade-individualism-anarchy-and-compassion?v=1684271084 #anarchism #bot
leftfist: Latest Left Fist podcast! The Working Week #14: #WWE Sale a Done Deal, Merging with #UFC Under #Endeavor, What Might it Mean for the Workers? https://www.spreaker.com/user/16534615/working-week-14
leftfist's status on Tuesday, 04-Apr-2023 23:15:55 JST
Latest Left Fist podcast! The Working Week #14: #WWE Sale a Done Deal, Merging with #UFC Under #Endeavor, What Might it Mean for the Workers? https://www.spreaker.com/user/16534615/working-week-14
The Working Week #14: WWE Sale a Done Deal, Merging with UFC Under Endeavor, What Might it Mean for the Workers? - The Left Fist: pro wrestling, pro-union!
anarchismhub: Libcom: **Encyclopedie des Nuisances #14**" English translations from the fourteenth issue of Encyclopedia of Nuisances, published in November 1989. Submitted by Fozzie on December 10, 2022 Copied to clipboard Ab Ovo - Encyclopedie des Nuisances Book traversal links for Encyclopedie des Nuisances #14 Aboutissement - Encyclopedie des Nuisances Up Ab Ovo - Encyclopedie des Nuisances "https://libcom.org/article/encyclopedie-des-nuisances-14#anarchism #bot
anarchismhub's status on Monday, 12-Dec-2022 01:58:52 JST
Libcom: **Encyclopedie des Nuisances #14** " English translations from the fourteenth issue of Encyclopedia of Nuisances, published in November 1989. Submitted by Fozzie on December 10, 2022 Copied to clipboard Ab Ovo - Encyclopedie des Nuisances Book traversal links for Encyclopedie des Nuisances #14 Aboutissement - Encyclopedie des Nuisances Up Ab Ovo - Encyclopedie des Nuisances " https://libcom.org/article/encyclopedie-des-nuisances-14 #anarchism #bot
anarchismhub: Anarchist News: **Fire Ant: Anarchist Prisoner Solidarity #14**"From Bloomington ABC Via IGD Announcing Fire Ant #14, a publication featuring the writings of anarchist prisoners. PDF for Printing Fire Ant is a quarterly publication focused on spreading the words of anarchist prisoners and generating material solidarity for our imprisoned friends. Begun as a collaboration between anarchist prisoners and anarchists in Maine, Fire Ant seeks to raise material aid for anarchist prisoners while fostering communication between anarchists on both sides of the…"https://anarchistnews.org/content/fire-ant-anarchist-prisoner-solidarity-14#anarchism #bot
anarchismhub's status on Saturday, 12-Nov-2022 06:00:38 JST
Anarchist News: **Fire Ant: Anarchist Prisoner Solidarity #14** "From Bloomington ABC Via IGD Announcing Fire Ant #14, a publication featuring the writings of anarchist prisoners. PDF for Printing Fire Ant is a quarterly publication focused on spreading the words of anarchist prisoners and generating material solidarity for our imprisoned friends. Begun as a collaboration between anarchist prisoners and anarchists in Maine, Fire Ant seeks to raise material aid for anarchist prisoners while fostering communication between anarchists on both sides of the…" https://anarchistnews.org/content/fire-ant-anarchist-prisoner-solidarity-14 #anarchism #bot
Fire Ant: Anarchist Prisoner Solidarity #14 | anarchistnews.org
anarchismhub: Libcom: **Midnight Notes Collective - 'Exterminism' or Class Struggle (1984)**" Midnight Notes Collective essay written for Radical Science Journal #14. Author Peter Linebaugh Submitted by NYAOAM on September 28, 2022 Copied to clipboard Midnight Notes Collective essay written for Radical Science Journal #14. Midnight Notes Article.pdf (1.79 MB) Midnight Notes Collective autonomist Marxism nuclear "https://libcom.org/article/midnight-notes-collective-exterminism-or-class-struggle-1984#anarchism #bot
anarchismhub's status on Thursday, 29-Sep-2022 07:12:53 JST
Libcom: **Midnight Notes Collective - 'Exterminism' or Class Struggle (1984)** " Midnight Notes Collective essay written for Radical Science Journal #14. Author Peter Linebaugh Submitted by NYAOAM on September 28, 2022 Copied to clipboard Midnight Notes Collective essay written for Radical Science Journal #14. Midnight Notes Article.pdf (1.79 MB) Midnight Notes Collective autonomist Marxism nuclear " https://libcom.org/article/midnight-notes-collective-exterminism-or-class-struggle-1984 #anarchism #bot
Midnight Notes Collective - 'Exterminism' or Class Struggle (1984)
mot: "ルーク・ロウ（IGD）の噴水芸【Cycle*2022 ツール・ド・フランス #14】" を YouTube で見る https://youtube.com/shorts/C0IuLVoyfJM?feature=shareこれなんの前触れもなく唐突に見せられてホント笑った
mot's status on Sunday, 24-Jul-2022 08:35:32 JST
"ルーク・ロウ（IGD）の噴水芸【Cycle*2022 ツール・ド・フランス #14】" を YouTube で見る https://youtube.com/shorts/C0IuLVoyfJM?feature=share これなんの前触れもなく唐突に見せられてホント笑った
ルーク・ロウ（IGD）の噴水芸【Cycle*2022 ツール・ド・フランス #14】